CERTIFICATION OF PRODUCT – Construction Products – CE Marking

On 4 April 2011 was published in Official Journal of EU a Regulation of the European parliament and of the Council (EU) no. 305/2011 of 9 March 2011 (Construction Products Regulations – CPR) laying down harmonized conditions for placing of construction products on the market and repealing Council Directive 89/106/EC (Construction Products Directive – CPD).  The Regulation requires, unlike the directive, direct effect and uniform implementation into national law of Member States EU. From 1 July 2013 shall be all construction products, for which a harmonized standard exist or ETA (European Technical Approval) when placed on the market obtained with CE marking and Declaration of Performance (DoP).

Placing The Construction Products on The EU Market

Construction products are in accordance with a European Law the „specific product“ and their placing on the market of the European Union and ESVO countries is regulated by the technical regulations, which give for manufacturers, importers, authorized agents and distributors specific duties. Conditions for placing on the market are partly harmonized (same for the whole EU) and partly edited by national legislation of each member state of the EU.

Group of products for which there are harmonized technical specifications fall under REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL (EU) No 305/2011 of 9 March 2011 laying down harmonized conditions for placing of construction products on the market and repealing Council Directive 89/106/EEC. For this prescription is used acronym CPR (Construction Products Regulation). Regulation has, unlike the directive, direct effect and requires adaptation of the national law of the Member States of the EU to its content.

Although the CPR regulation entered into force on 24thApril 2011, most of the articles and annexes are effective from 1 July 2013. From this  day must be all construction products, for which there is a harmonized standard or ETA (European Technical Approval), when placed on the market obtained with CE marking, declaration of performance and detailed technical documentation. Manufacturers may on the basis of certificates of conformity that were issued before 1 July 2013 by CPD, make a Declaration of Performance in accordance with CPR.

If for the construction product harmonized standard does not exist (or is under preparation), or if the product would substantially deviated and the manufacturer would like to affix the product with CE marking, may request for Technical Assessment Body (TAB) to issue European Technical Assessment (ETA). If the manufacturer does not request for issuing of ETA, considered a product under the national legislation of the country in which the product is placed. Thus assessed product can not be marked with CE.

Services provided in connection with conformity assessment of construction products

  • Conformity assessmentaccording to the requirements of national law laying down the technical requirements for selected  construction products
  • Conformity assessment by Notified Body according to the requirements of  the Regulation 305/2011  laying down the technical requirements for construction products marked with CE
  • Testing of construction products in the Accredited Laboratory 
  • Certification of management systems (ISO 9001, ISO 14001, OHSAS 45001)

Services provided in connection with conformity assessment of construction products

Product Applicable hEN System of Conformity
Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys) EAD 060008-00-0802
EAD 060001-00-0802
EAD 060003-00-0802
EAD 060012-00-0802
EN 12446:2011
EN 13063-:2005+A1:2007
EN 13063-:2005+A1:2007
EN 13063-3:2007
EN 13069:2005
EN 13084-5:2005
EN 13084-5:2005/AC:2006
EN 13084-7:2012
EN 14471:2013+A1:2015
EN 1457-1:2012
EN 1457-2:2012
EN 14989-1:2007
EN 14989-2:2007
EN 1806:2006
EN 1856-1:2009
EN 1856-2:2009
EN 1857:2010
EN 1858:2008+A1:2011
EAD 060008-00-0802
EAD 060001-00-0802
EAD 060003-00-0802
EAD 060012-00-0802
EN 14471:2013+A1:2015		  2+/1
Plasterboards and ceiling elements with thin laminations, fibrous gypsum boards, fibrous gypsum, plaster casts, and composite panels (laminates), in which the incorporated material is placed on a face susceptible to be exposed to fire, including relevant ancillary products (in walls, partitions or ceilings (or lining thereof) EAD 070001-01-0504
EAD 070002-00-0505
EN 13815:2006		  1/3
Structural bearings
Spherical and cylindrical bearing with special sliding material made of fluoropolymer
Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing
Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing
Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres		 EN 1337-3:2005
EN 1337-4:2004
EN 1337-4:2004/AC:2007
EN 1337-5:2005
EN 1337-6:2004
EN 1337-7:2004
EN 1337-8:2007
EN 15129:2009
EAD 050013-00-0301
EAD 040650-00-1201
EAD 040394-00-1201
EAD 040777-00-1201		 1/3
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression  products :
Water flow detectors/switches (fire safety)
Alarm devices;
Alarm transmission routing devices ,
Fire alarm systems-kits;
Control and indicating devices;
Check valves and non-return valves;
Wet alarm valve assemblies
Dry alarm valve assemblies;
Fire hydrants;		 EN 14339:2005
EN 14384:2005
EN 12259-5:2002
EN 12259-3:2000/A2:2005
EN 12259-2:1999/A2:2005
EN 12094-13:2001/AC:2002
EN 54-21:2006
EN 12094-12:2003
EN 14604:2005/AC:2008
EN 54-23:2010
EN 54-3:2001/A2:2006		 1
First aid hose systems-kits;
Flexible connectors;
Selector valves and their actuators, High pressure container valve assemblies and their actuators;		 EN 671-1:2012
EN 671-2:2012
EN 12094-4:2004
EN 12094-5:2006
EN 12094-8:2006		 1
Input/output devices;
Manual call points;
Multiple controls;
Control and indicating devices;
Mechanical weighing devices;
Non-electrical disable devices;
Nozzles/sprinklers/outlets
Sprinklers and water spray systems-kits;
Smoke curtains;
Power supplies;
Power supplies(fire control components);
Pressure differential systems-kits;
Pressure gauges and pressure switches;
Short circuit isolators;		 EN 54-18:2005/AC:2007
EN 54-24:2008
EN 54-25:2008/AC:2012
EN 12094-3:2003
EN 54-11:2001/A1:2005
EN 12094-2:2003
EN 12094-6:2006
EN 12259-4:2000/A1:2001
EN 12101-6:2005/AC:2006
EN 12094-7:2000/A1:2005
EN 12259-1:1999+A1:01/A3:06
EN 12094-11:2003
EN 12094-10:2003
EN 12094-1:2003
EN 54-16:2008
EN 54-2:1997/A1:2006
EN 54-17:2005/AC:2007
EN 54-4:1997/A2:2006		 1
Smoke and heat exhaust ventilation systems-kits;
Smoke curtains
Powered ventilators
Ducts (fire safety)
Dampers(fire safety)
Smoke, heat and flame detectors;
Foam systems-kits;
Combined fire detection and fire alarm systems-kits		 EN 12101-3:2002/AC:2005
EN 12101-1:2005/A1:2006
EN 12101-10:2005/AC:2007
EN 12101-8:2011
EN 15650:2010
EN 54-7:2000/A2:2006
EN 12101-7:2011
EN 12101-3:2015
EN 54-20:2006/AC:2008
EN 12094-9:2003
EN 54-10:2002/A1:2005
EN 54-12:2015
EN 54-20:2006/AC:2008
EN 54-5:2017+A1:2018
EN 54-7:2018		 1
Road lighting columns EAD 120003-00-0106
EN 40-4:2005/AC:2006
EN 40-5:2002
EN 40-6:2002
EN 40-7:2002		 1
Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) EN 1423:2012/AC:2013 1
Road marking products:
Retro reflecting road studs		 EAD 230011-00-0106
EN 1463-1:2009		 1
Micro prismatic retro-reflective sheetings EAD 120001-01-0106 1
Vehicle restraint systems: parapets, Vehicle restraint systems cables, Vehicle restraint barriers: transition barriers, Vehicle restraint systems: crash cushions EN 1317-5:2007+A2:2012/AC:2012 1
Road traffic signs and traffic control devices EN 12899-1:2007 1
Variable message traffic signs EN 12966-1:2005+A1:2009 1
Permanent warning devices and delineators EN 12352:2006
EN 12899-3:2007		 1
Traffic lights and fixed danger lamps EN 12368:2006 1
Traffic bollards EN 12899-2:2007 1
Permanent traffic signs (for circulation areas). EN 12966-1:2005+A1:2009 1
Curtain wallings
Curtain wall kits (as external walls subject to reaction to fire requirements)
Bonded fasteners for use in concrete (for external walls and roofs)		 EN 13830:2003
EAD 330499-00-0601		 1
Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used for reinforcement EN 13257:2016
EN 13265:2016
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004/A1:2006
EN 13492:2004/A1:2006
EN 13493:2005
EN 15381:2008		 2+
Geosynthetics (membranes and textiles),geotextiles, geocomposites, geogrids, geomembranes andgeonets used for drainage and/or filtration EAD 080002-00-0102
EN 13249:2016
EN 13250:2016
EN 13251:2016
EN 13252:2016
EN 13253:2016
EN 13257:2016
EN 13265:2016
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004/A1:2006
EN 13492:2004/A1:2006
EN 13493:2005		  2+
Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used as protective layer EN 13249:2016
EN 13250:2016
EN 13251:2016
EN 13252:2016
EN 13253:2016
EN 13254:2016
EN 13255:2016
EN 13256:2016
EN 13257:2016
EN 13265:2016
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004/A1:2006
EN 13492:2004/A1:2006
EN 13493:2005		  2+
Geosynthetics (membranes and textiles), geotextiles, geocomposites, geogrids, geomembranes and geonets used as fluid or gas barriers EN 13257:2016
EN 13265:2016
EN 13361:2004/A1:2006
EN 13362:2005
EN 13491:2004/A1:2006
EN 13492:2004/A1:2006
EN 13493:2005
EN 15382:2013		  2+
Metal anchors for use in concrete (mechanical fasteners) –
Metal anchors for use in concrete (heavy-duty type) (for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings).
Metal anchors for use in concrete for fixing lightweight systems- Metal anchors for use in concrete (light-duty type)		 EAD 330011-00-0601
EAD 330012-00-0601
EAD 330014-00-0601
EAD 330084-00-0601
EAD 330924-00-0601
EAD 330232-00-0601		 1
Sealants for non-structural use
Sealants for external walls
Sealants for sanitary joints
Sealants for pedestrian walkways		 EN 15651-1:2012
EN 15651-2:2012
EN 15651-3:2012
EN 15651-4:2012		 1/3
Power, control and communication cables EN 50575:2014/A1:2016  1+
Solid structural timber products:
Elements (bridge elements, truss elements, sleepers, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) (bridges, railtracks and buildings), Timber poles
Kits (trusses, floors, walls, roofs, frames) (bridges, railtracks and buildings),		 EAD 130002-00-0304
EAD 130005-00-0304
EAD 130011-00-0304
EAD 130012-00-0304
EAD 130013-00-0304
EAD 130166-00-0304
EAD 330079-00-0602
EAD 130022-00-0304
EAD 130167-00-0304
EN 14374:2004
EN 14081-1:2005+A1:2011
EN 14229:2010
EN 14250:2010		  1/2+
Structural timber products:
Glued laminated timber made of steam-cured solid timber with rectangular cross section – Softwood (for bridges and buildings)		 EAD 130197-00-0304  1
Structural glued laminated products and other glued timber products: Elements (bridge elements, truss elements, floor elements, wall elements, roof elements such as beams, arches, joists, rafters, columns, poles, piles) EAD 130022-00-0304
EN 14080:2013
EN 14374:2004
EN 15497:2014		  1
Structural glued laminated products and other glued timber products: Kits (trusses, floors, walls, roofs, frames) EN 14080:2013 1
Metal injection anchors for use in masonry (fixing and/or supporting to masonry, structural elements (which contribute to the  stability of the works) or heavy units such as claddings as well as installations) EAD 330076-00-0604 1
Wood-based panels  – Unfaced overlaid and veneered or coated wood-based panels
(for structural elements in internal or external application)		 EN 13986:2004+A1:2015 1/3
Wood-based panels – Unfaced overlaid and veneered or coated wood-based panels EN 13986:2004+A1:2015  2+
Wood-based panels – Unfaced, overlaid and veneered or coated wood-based panels
(for non structural elements in internal or external applications)		 EN 13986:2004+A1:2015  1/3
Plastic anchors for use in concrete and masonry (for use in systems, such as facade systems, for fixing or supporting elements which contribute to the stability of the systems). EAD 330196-01-0604
EAD 330389-00-0601
EAD 330965-00-0601		 2+
Cements, building limes and other hydraulic binders
Calcium sulphoaluminate based cement
Calcium aluminate based refractory cement
Rapid hardening sulfate resistant calcium sulphoaluminate based cement
Portland-pozzolana cement for use in tropical conditions
Rapid setting cement
Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH)		 EAD 150002-00-0301
EAD 150001-00-0301
EAD 150004-00-0301
EAD 150007-00-0301
EAD 150008-00-0301
EAD 150009-00-0301		 1+
Common cements,
Masonry cements;
Calcium aluminate cements;
Pozzolanic cements;
Composite cements
Portland cement,
Portland composite cements (Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement)
Blast furnace cements
Special cements,
Low heat cements,
Sulfate resisting cement,
White cement,
Sea water resisting cement,
Low alkali cement		 EAD 150003-00-0301
EN 413-1:2011
EN 197-1:2011
EN 14647:2005/AC:2006
EN 14216:2015
EN 15743:2010+A1:2015		  1+
Calcium limes, Dolomitic limes, Hydraulic limes EN 459-1:2010 2+
Hydraulic road binders EN 13282-1:2013
EN 15368:2008+A1:2010		 2+
External thermal insulation composite systems/kits with rendering (ETICS) (in external wall not subject to fire regulations),
External thermal insulation composite systems/kits with rendering (ETICS) (in external wall subject to fire regulations).		 EAD 040016-00-0404
EAD 040287-00-0404
EAD 040016-00-0404		 1/2+
External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings (in external wall subject to fire regulations) EAD 040089-00-0404
EAD 040427-00-0404
EAD 040089-00-0404		 1/2+
Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites) (used for the reinforcement of concrete) EAD 260001-00-0303 1+
Fasteners for structural timber products – Nailing plates (for structural timber products), Punched nail plates (for structural timber products), Toothed-plate connectors (for structural timber products), Shear plates (for structural timber products), Self adjustable clamp assemblies EAD 130033-00-0603
EN 14545:2008
EAD 330155-00-0602		 2+
Fasteners for structural timber products
connectors for timber, split ring connectors, cylindrical steel and wood dowels, wood screws, threaded bolts, wood nails		 EN 14592:2008+A1:2012 3
Factory-made, designed masonry mortars EN 998-2:2016 2+
Masonry units category I EN 771-1:2011+A1:2015
EN 771-2:2011+A1:2015
EN 771-3:2011+A1:2015
EN 771-4:2011+A1:2015
EN 771-5:2011+A1:2015
EN 771-6:2011+A1:2015		 2+
Masonry units incorporating thermal insulating materials placed on a face susceptible to be exposed to fire (in walls and partitions subject to reaction to fire regulations) EN 15824: 2017 1/3
Rigid flooring products (a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products
Raised access floors, cavity floors (for internal uses including enclosed public transport premises)
Terrace decking kit (for internal uses including enclosed public transport premises)		 EAD 190002-00-0502
EN 12057:2004
EN 12058:2004
EN 14342:2013
EN 14411:2012
EN 15285:2008/AC:2008
EN 1344:2013
EAD 190005-00-0402		 1/3
Resilient and textile floorings -homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) EN 14041:2004/AC:2006
EN 14904:2006		  1/3
Floor screed materials EN 13454-1:2004
EN 13813:2002
EN 14016-1:2004		 1/3
Structural metallic products and ancillaries :
Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating
Welding materials (for uses in structural metallic works)
Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works)
Nailed shear connector
Kit for micropiles – Kit with hollow bars for self-drilling micropiles – Hollow bars of seamless steel tubes
Weldmesh gabion boxes and mattresses (for uses in work’s frames and foundations)
Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work’s frames and foundations)
finished metal framing for suspended ceilings (heavy duty)
Wire ring connection products (for uses in structural metallic works)
Prefabricated steel and stainless steel wire ropes with end connectors (for uses in structural metallic works)
Hot-rolled mounting channel (for uses in structural metallic works)		 EAD 200017-00-0302
EAD 200019-00-0102
EAD 200022-00-0302
EAD 200032-00-0602
EAD 330667-00-0602
EN 10025-1:2004
EN 10088-4:2009
EN 10088-5:2009
EN 10210-1:2006
EN 10219-1:2006
EN 10340:2007
EN 10340:2007/AC:2008
EN 10343:2009
EN 15048-1:2007
EN 15088:2005
EN 13479:2017
EAD 200033-00-0602
EAD 200036-00-0103
EAD 200020-00-0102
EAD 200002-00-0602
EAD 200039-00-0102
EN 1090-1:2009+A1:2011
EAD 200012-00-0401
EAD 200035-00-0302
EAD 200086-00-0602
EAD 200026-00-0102
EAD 330001-00-0602
EAD 330046-01-0602
EAD 330047-01-0602
EAD 330080-00-0602
EAD 330153-00-0602
EN 14399-1:2015
EAD 200001-00-0602
EAD 330667-00-0602		 2+
Doors, windows, shutters, blinds, gates and related building hardware
Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel
Multi-axis concealed hinge assemblies		 EAD 020029-00-1102
EAD 020001-01-0405		 1
Roof coverings, rooflights, roof windows and ancillary products
Roofing tiles, slates, stones and shingles
Decentralized energy efficient low-pressure ventilation unit
Flat and profiled sheets
Roofing slates made of polypropylene, limestone and fillers
Flat plastic sheets for fully supported discontinuous roofing and external cladding		 EN 14963:2006
EN 1873:2005
EN 544:2011
EN 1013:2012+A1:2014
EN 14782:2006
EN 14783:2013
EN 16153:2013+A1:2015
EN 16240:2013
EN 494:2012+A1:2015
EN 534:2006+A1:2010
EAD 220006-00-0402
EN 14964:2006
EN 490: 2011
EN 492:2012
EN 492:2012+A2:2018
EAD 220018-00-0401
EAD 220069-00-0402
EAD 220006-00-0402
EAD 220010-00-0402		  1/3
Factory-bonded composite or sandwich panels EN 14509:2013 1
Post-tensioning kits
Post-tensioning systems for prestressing of structures
Special filling products for post-tensioning kits		 EAD 160004-00-0301
EAD 160027-00-0301		 1+
Surface treatments EN 12271:2006
EN 12273:2008		  2+
Aggregates and fillers for concrete, mortar and grout
Aggregates for bituminous mixtures and surface treatments
Aggregates unbound and hydraulically bound mixtures
Armourstones
Railway ballast
Fillers for bituminous mixtures and surface treatments		 EN 12620:2002+A1:2008
EN 13043:2002/AC:2004
EN 13055-1:2002/AC:2004
EN 13055-2:2004
EN 13139:2002/AC:2004
EN 13242:2002+A1:2007
EN 13383-1:2002/AC:2004
EN 13450:2002/AC:2004		  2+
Bituminous mixtures EN 13108-1:2006/AC:2008
EN 13108-2:2006/AC:2008
EN 13108-3:2006/AC:2008
EN 13108-4:2006/AC:2008
EN 13108-5:2006/AC:2008
EN 13108-6:2006/AC:2008
EN 13108-7:2006/AC:2008		 2+/1
Bitumen EN 12591:2009
EN 13808:2013
EN 13924:2006/AC:2006
EN 14023:2010
EN 15322:2013		 2+
Bridge deck waterproofing products and kits EN 14695:2010 2+
Prefabricated stair kits EAD 340006-00-0506 2+/1
Roof sheets EN 13707:2004+A2:2009
EN 13956:2012		 1/2+ /3
Membranes –
Damp proofing sheets		 EN 13967:2012
EN 13969:2004/A1:2006		 1/2+ /3
Membranes –
Damp proof courses
Roof underlays
Water vapour control layers
Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete		 EAD 030218-00-0402
EN 14891:2012/AC:2012
EN 14909:2012
EN 14967:2006
EN 15814:2011+A2:2014
EN 13859-1:2010
EN 13859-2:2010
EN 13970:2004/A1:2006
EN 13984:2013
EAD 320002-02-0605		 1/3
Light composite wood-based beams and columns (including T-beams, i.e. beam/slab combinations) EAD 130031-00-0304 1
Building hardware related to doors and gates (fire/smoke compartmentation and on escape routes). EN 1125:2008
EN1154:1996/A1:2002/AC:2006
EN1155:1996/A1:2002/AC:2006
EN1158:1997/A1:2002/AC:2006
EN 12209:2003/AC:2005
EN 14846:2008
EN 179:2008
EN 1935:2002
EN 1935:2002/AC:2003		 1
Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes). EAD 020011-00-0405
EN 13241:2003+A2:2016
EN 14351-1:2006+A2:2016
EN 16034:2014		 1/3
Precast normal/lightweight/autoclaved aerated concrete products
Prefabricated reinforced components of autoclaved aerated concrete		 EAD 010001-00-0301
EAD 010003-00-0301
EAD 010013-00-0301
EAD 200005-00-0103
EAD 340025-00-0403
EN 1168:2005+A3:2011
EN 12737:2004+A1:2007
EN 12794:2005+A1:2007/AC:2008
EN 12843:2004
EN 13224:2011
EN 13225:2013
EN 13693:2004+A1:2009
EN 13747:2005+A2:2010
EN 13978-1:2005
EN 14843:2007
EN 14844:2006+A2:2011
EN 14991:2007
EN 14992:2007+A1:2012
EN 15037-1:2008
EN 15037-4:2010+A1:2013
EN 15037-5:2013
EN 15050:2007+A1:2012
EN 1520:2011
EN 15258:2008
EN 12602:2016		 1/2+/3
Fire protective products (including coatings) (for fire compartmentation and/or fire protection or fire performance).
Fire protective board, slab and mat products and kits		 EAD 350022-01-1107
EAD 350134-00-1104
EAD 350142-00-1106		 1
Fire stopping, fire sealing products (for fire compartmentation and/or fire protection or fire performance)
Renderings and rendering kits intended for fire resistant applications
Linear joint and gap seals
Reactive coatings for fire protection of steel elements
Penetration seals		 EAD 350140-00-1106
EAD 350141-00-1106
EAD 350402-00-1106
EAD 350454-00-1104
EAD 350003-00-1109
EAD 350005-00-1104		 1
Concrete protection and repair products
Type I addition for concrete, mortar and screed materials – Aqueous solution		 EN 1504-2:2004
EN 1504-3:2005
EN 1504-4:2004
EN 1504-5:2004
EN 1504-6:2006
EN 1504-7:2006
EAD 260007-00-0301		 1/2+/3
Additions (type I) EN 12878:2005
EN 12878:2005/AC:2006		 2+
Admixtures EN 934-2:2009+A1:2012
EN 934-3:2009+A1:2012
EN 934-4:2009
EN 934-5:2007		 2+
Additions (Type II) EAD 260006-00-0301
EAD 260014-00-0301
EN 13263-1:2005+A1:2009
EN 15167-1:2006
EN 450-1:2012		 1+
Fibres
Alkali resistant glass fibres containing zirconium dioxide for use in concrete		 EN 14889-1:2006
EN 14889-2:2006
EAD 260002-00-0301		 1 /3
Structural adhesives EN 15274:2015
EN 15275:2015		 2+
Adhesives for tiles EN 12004:2007+A1:2012 1/3
Pipes, tanks and ancillaries not in contact with water intended for human consumption – tanks , valves and taps, Fittings, adhesives, joints, joint sealings and gaskets EN 12285-2:2005
EN 13341:2005+A1:2011
EN 295-1:2013
EN 295-4:2013
EN 295-5:2013
EN 295-7:2013
EN 331:1998/A1:2010
EN 682:2002/A1:2005
EN 15069:2008
EAD 180018-00-0704
EN 1057:2006+A1:2010
EN 14800:2007
EN 10255:2004+A1:2007		 1/3
Flat glass, profiled glass and glass-block products , insulating glass units EN 1279-5:2005+A2:2010 1
Flat or curved glass panels EN 1036-2:2008
EN 1096-4:2018
EN 12150-2:2004
EN 12337-2:2004
EN 1279-5:2018
EN 13024-2:2004
EN 14178-2:2004
EN 14179-2:2005
EN 14321-2:2005
EN 14449:2005/AC:2005
EN 15681-2:2017
EN 15682-2:2013
EN 15683-2:2013
EN 1748-1-2:2004
EN 1748-2-2:2004
EN 1863-2:2004
EN 572-9:2004		 1
Glass-block EN 1051-2:2007 1
Channel bars (EOTA 06.01/01) (for anchoring uses) EAD 330008-02-0601 1
Prefabricated wood-based load-bearing stressed skin panels
Self-supporting composite lightweight panels		 EAD 130090-00-0303 1
Single point supported vertical glazing EAD 090017-00-0404 1
Rockfall protection kits EAD 230004-00-0106
EAD 230005-00-0106
EAD 230025-00-0106
EAD 340020-00-0106		 1
Prefabricated building units EAD 340037-00-0204 1
Concrete frame building kits EAD 340002-00-0204 1
Metal frame building kits EAD 230008-00-0106 1
Waste water engineering products inside buildings  :
Kits for waste water pumping station and effluent lifting plants (for use inside building)		 EN 12050-1:2001
EN 12050-2:2000
EN 12050-3:2000
EN 12050-4:2000		 3
Waste water engineering products outside buildings  :
Kits and elements for waste water treatment plants and on-site treatment equipment -Septic tanks (to be used outside buildings, for rain water, faecal and organic effluents)
Manholes and inspection chambers
Prefabricated drainage channel (to be used outside buildings, for waste water from buildings and civil engineering works including roads)		 EN 12566-1:2000/A1:2003
EN 12566-3:2005+A2:2013
EN 12566-4:2007
EN 12566-6:2013
EN 12566-7:2013
EN 1433:2002/A1:2005
EN 295-6:2013		 1/3
Internal and external wall and ceiling finishes
Coverings in roll form/ Panels/Sidings/ Tiles /Cladding slabs/Shingles/suspended ceilings		 EN 14411:2012
EN 15286:2013
EN 14716:2004
EN 15102:2007+A1:2011
EN 490: 2011
EN 12467:2012
EN 12467:2012+A2:2018
EN 16153:2013+A1:2015
EN 13964:2014
EN 494:2012+A1:2015
EAD 210024-00-0504
EN 1013:2012+A1:2014
EN 438-7:2005
EN 1469:2015
EN 14783:2013
EN 13245-2:2008
EN 13245-2:2008/AC:2009
EN 14915:2013		 1/3
Space heating appliances
Space heating appliances without internal energy source
Space heating appliances burning solid and liquid fuels		 EN 14037-1:2016
EN 442-1:2014
EN 12809:2001/A1:2004/AC:2007
EN 12815:2001/A1:2004/AC:2007
EN 13229:2001/A2:2004/AC:2007
EN 13240:2001/A2:2004/AC:2007
EN 14785:2006
EN 15250:2007
EN 15821:2010		 1/3
Liquid applied roof waterproofing on the basis of polysiloxane EAD 030019-00-0402 1
Additives for asphalt production – bitumen granules made from recycled bituminous roofing felt EAD 230012-00-0105 2+
Thermal insulating products
Thermal insulation products for buildings with radiant heat reflective component
Insulation made of loose-fill or compound granulated expanded cork
In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres
Thermal and/or sound insulation based on bound expanded polystyrene bulk material
Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing
Fiber reinforced silica aerogel thermal insulation
Thermal insulating products (factory-made products and products intended to be formed in-situ)
Thermal insulation an/or sound absorbing boards based on expanded polystyrene and cement
Low lambda composite boards made of mineral wool fibres and aerogel additives
Factory-made thermal and acoustic insulations made of polyester fibres
In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork
Modular element for building services
Ventilation system made of mineral wool covered with film (outside and inside)		 EAD 040007-00-1201
EAD 040369-00-1201
EAD 040456-00-1201
EAD 040635-00-1201
EAD 040650-00-1201
EAD 040643-00-1201
EAD 040005-00-1201
EAD 040090-00-1201
EN 13162:2012+A1:2015
EN 13163:2012+A1:2015
EN 13164:2012+A1:2015
EN 13165:2012+A2:2016
EN 13166:2012+A2:2016
EN 13167:2012+A1:2015
EN 13168:2012+A1:2015
EN 13169:2012+A1:2015
EN 13170:2012+A1:2015
EN 13171:2012+A1:2015
EN 14063-1:2004/AC:2006
EN 14064-1:2010
EN 14303:2009+A1:2013
EN 14304:2009+A1:2013
EN 14305:2009+A1:2013
EN 14306:2009+A1:2013
EN 14307:2009+A1:2013
EN 14308:2009+A1:2013
EN 14309:2009+A1:2013
EN 14313:2009+A1:2013
EN 14314:2009+A1:2013
EN 14315-1:2013
EN 14316-1:2004
EN 14317-1:2004
EN 14318-1:2013
EN 14319-1:2013
EN 14320-1:2013
EN 14933:2007
EN 14934:2007
EN 15501:2013
EN 15599-1:2010
EN 15600-1:2010
EN 15732:2012
EN 16069:2012+A1:2015
EAD 040011-00-1201
EAD 040065-00-1201
EAD 040037-00-1201
EAD 040288-00-1201
EAD 040313-00-1201
EAD 210004-00-0805
EAD 360001-00-0803		 1/3
Beam/block Floor Units and Elements incorporating organic materials EN 15037-5:2013 1
Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder EAD 120011-00-0107 1
Kits for exterior wall claddings
Kit composed by subframe and fixings for fastening cladding and external wall elements
Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings
Kits for external wall claddings made of agglomerated stone
Kits for external wall claddings mechanically fixed		 EAD 090034-00-0404
EAD 090001-00-0404
EAD 090019-00-0404
EAD 090119-00-0404
EAD 090120-00-0404
EAD 130082-00-0603
EAD 090058-00-0404
EAD 090020-00-0404
EAD 090062-00-0404		 1/2+

Process of Certification

click on image to view in full size

Fast and effective CPR Certification

As our experience Certification Bodies and Notified Bodies are very busynow a days and often have lead times of 8-10 weeks before they actually can start your project. Quoted certification times are typically 8 weeks, but this is on the ‘assumption’ that the product and the related documents are fully compliant with the Standards they are certified to, for a product being Certified for Europe. When products don’t comply, the certification  process is held up, and on average, certification typically takes over 4-5 months. The only way to get fast certification is to submit the project for certification with no non-compliances and the correct documents required for certification.

Our Experts are available at your service 24×7 to reduce the timelines and unwanted delays.

Your Benefits At A Glance

With our comprehensive solutions for explosion protection you can:

  • Ensure product safety and compliance worldwide.
  • Reach full compliance and certification prior to product placement.
  • Gain competitive advantage and greater market access with certification marks from an international Notified Body.
  • Tools used for Easy Access of database, reducing waiting time for documents to be transferred between agencies through conventional methods.
  • Significantly reduce approval time and cost by using harmonized standards and common test protocols.
  • Reduce risk of company liability with documented safety standards.
  • Benefit from our exclusive one-stop-shop service, covering a wide range of international certification from a single source.
  • Count on experts to ensure compliance with the European directive and national regulations
  • QVC offers CE certification service for almost all types of Construction Products

RELATED SERVICES